Interior Finish: 22 gauge stainless steel with specular aluminum reflective panels
Exterior Finish: Sprayed enamel over steel
Light Banks: 20 gauge stainless steel with acrylic barrier and specular aluminum reflector.
Standard 12"clearance to shelf (9" clearance for 4-bank)
Notes:
- Temperature and humidity ranges are based on 25°C / 50% RH ambient.
- Usable chamber dimensions are restricted by light bank dimensions. See “Light Bank Dimensions” below.
- Exterior height shown with casters (Upright Floor Model); and with leveling bolts (Benchtop Model). Door may be removed to decrease depth to 33″(Upright Floor Model).
- Low temp (4°C) option is available upon special request. Consult factory for more information.
- 50 Hz / 220V, 120 V, and other special voltages are available upon special request. Consult factory for more information.
Notes:
- “Dual source light bank” not available in 4-bank configuration.
- Alternate light measurement units are available upon request.
- All low level readings are based on 4-lamp operational mode.
- Ranges are subject to change with special filtration requests.
- Dual source ranges are based on single light source operation. When operating both sources simultaneously, the low end ranges may be slightly higher than published.
- Maximum light intensity is based on measurements after 400 hours of burn-in time.
- Factory default level is based on approximately 60% (UV) and 80% (CW, FS) of maximum light intensity.
