Interior Finish (All Models): 22 gauge stainless steel
Exterior Finish (All Models): Sprayed enamel over steel (optional stainless steel)
Notes applicable to all models:
- Temperature and humidity ranges are based upon 25°C / 50% RH ambient.
- Refer to separate HUMIDITY PERFORMANCE CURVES for specific range limitations of humidity control models.
- Exterior height shown with casters (except benchtop model) and with leveling bolts (bench-top model). Door may be removed to decrease depth to 33" (floor models).
- Shelf quantities are "standard" number supplied with unit. "Maximum" number based on minimum 3" spacings as recommended by ES.
- 50Hz/220V, 120V, and other special voltages are available upon special request. Consult factory for more information.
- "CDMD" models - A desiccant wheel drier is field mounted on the unit behind this model chamber. This requires an additional depth allowance of 12."
- “CDM-AT” models - An air tower drier is field mounted on the unit behind this special model chamber. This requires an additional depth of 5" for the compressed air fed system
- “-LT”&“-SS”models - The suffixes are added to denote Low Temperature capability option (-25°C) and Stainless Steel exterior option.
